Back to Blog
Product Reviews 2026-11-16 Le Col 0 views

Pro Aero Mitts: Fit, Grip and Hand Comfort Guide

Pro Aero Mitts: Fit, Grip and Hand Comfort Guide

Learn how the unpadded Pro Aero Mitts are designed to fit, what their aero fabric and ventilation mean for comfort, and how to choose a size before you buy.

Start with the design, then judge the fit

The Pro Aero Mitts are not a general-purpose padded mitt. They are unpadded and built around speed and breathability, with a longer cut than a standard cycling mitt. That changes what a good fit feels like: you are checking for a close, secure hand-to-bar connection rather than cushioning under the palm.

Before you choose a size, it helps to know what the catalog actually confirms about the construction. The back of the hand uses a high-performance tripping fabric intended to create a boundary layer for an aerodynamic advantage. Strategic perforated holes, mesh areas between the fingers and a moisture-wicking fabric are all part of the breathability story. The mitts are also cut longer than a standard cycling mitt to match up with a TT suit, though Le Col notes they can also be worn effectively with a Pro Aero Jersey.

What the Pro Aero Mitts record confirms

  • Pro Aero Mitts: The back of the hand uses high-performance tripping fabric to create a boundary layer for an aerodynamic advantage. This is the core reason to choose these mitts over a standard padded pair, and it explains why the fit should be close rather than loose.
    Pro Aero Mitts
    Pro Aero Mitts
  • Pro Aero Mitts: The mitts are unpadded and focus on speed optimisation and breathability. If you want palm cushioning, this is not the design brief; if you want a stripped-back race mitt, the lack of padding is intentional.
  • Pro Aero Mitts: Strategic perforated holes, mesh areas between fingers and a moisture-wicking fabric support a clean, cool feeling. These details matter for hand comfort on warm or intense rides, where sweat and heat build up quickly.
  • Pro Aero Mitts: The mitts are cut longer than a standard cycling mitt to match up with a TT suit, and can also be worn with a Pro Aero Jersey. The longer cut affects where the cuff sits on your wrist and how the mitt interfaces with your sleeve, so check that transition before you ride.

How to check the fit before your first ride

The supplied information does not include a size chart or hand-circumference measurements, so use the checks below as a practical starting point rather than a manufacturer fitting protocol. The goal is to confirm the mitt feels secure without restricting your grip.

  1. Check the finger web: With the mitt on, make a fist and spread your fingers. The mesh areas between the fingers should sit flat without pulling tight or bunching. If the web digs in, the fit is likely too small.
  2. Check the palm: Because the mitt is unpadded, you should feel the bar tape directly. Look for wrinkles or excess fabric across the palm; a smooth, close surface is what you want. If the palm bunches, try a different size.
  3. Check the cuff and longer cut: The longer cut is designed to meet a TT suit or work with a Pro Aero Jersey. Put the mitt on with your jersey or suit sleeve and check that the cuff sits smoothly without a gap or heavy overlap. If the cuff rides up or folds over, the size or sleeve combination may not be right.
  4. Check the closure: The supplied record does not describe the wrist closure, so inspect what arrives. Fasten it as intended and confirm it holds without pinching. If it leaves deep marks or feels tight, do not ignore it.

Grip and comfort: what to expect from an unpadded mitt

Grip comes from the fit and the bar interface, not from padding. A close-fitting unpadded mitt can give a direct feel for the bars, which many riders prefer for racing and fast training. The trade-off is honest: without padding, you lose cushioning. If your hands are sensitive on rough roads or long rides, that is a real consideration.

The breathability details are where the Pro Aero Mitts earn their place in warm conditions. Perforated holes and mesh between the fingers help move heat away, and the moisture-wicking fabric is intended to keep the hand feeling dry. That does not guarantee comfort in every condition, but it is a coherent design for fast, sweaty efforts.

The longer cut also changes the feel at the wrist. A standard mitt ends higher; this one extends further, so check that your jersey or suit sleeve does not bunch against it. A smooth transition is part of getting the aerodynamic benefit the mitt is designed for.

Pro Aero Mitts vs a standard padded cycling mitt

The right choice depends on what you want from a mitt. The comparison below sticks to what the catalog confirms.

  • Padding: Pro Aero Mitts: unpadded. A standard padded mitt: padding is the norm, though the exact amount varies by model.
  • Primary focus: Pro Aero Mitts: speed optimisation and breathability. A standard padded mitt: general comfort and cushioning.
  • Cuff length: Pro Aero Mitts: longer cut than a standard cycling mitt, designed to match a TT suit or Pro Aero Jersey. A standard mitt: shorter, conventional cuff.
  • Best for: Pro Aero Mitts: riders prioritising aerodynamics and a direct bar feel in warm conditions. A standard padded mitt: riders who want cushioning or are unsure about unpadded comfort.

Sizing and colour: what the catalog offers

The Pro Aero Mitts are available in M and L, both in Black. That is the full variant evidence supplied here. If you normally fall between sizes, the lack of a published hand measurement guide means you will need to rely on the fit checks above and your experience with other Le Col gloves or mitts. There is no half size or alternative colour confirmed in this record.

Because the mitt is unpadded and cut longer, size choice affects both palm tightness and cuff position. A size that feels right in the palm but short at the cuff is not the right size for this design. Use the sleeve transition as a tie-breaker if you are between M and L.

Where the supplied evidence stops

The catalog does not include washing instructions, a size chart, hand measurements, closure type or a temperature range for the Pro Aero Mitts. It also does not state a specific aerodynamic saving. Treat any claim beyond the supplied facts as unconfirmed. If you need care guidance, check the product packaging or Le Col's care information rather than assuming a method.

What the record does support is a clear picture: an unpadded, breathable, longer-cut mitt built for speed and a close fit. Use the fit checks and the sleeve transition to decide whether it suits your hands and your kit.

Related Articles

Customer Service
Home
Products
Cart
Profile